My Cart

Close

Change and Adjust Your Apple Watch Band: Everything You Need To Know

Posted on January 25 2019

 

There is no denying that an Apple Watch Band adds style your smartwatch, and lets you make a differentiated statement. They Apple Watch Bands come in a wide variety of colors, styles, and sizes. In fact, choosing the one becomes an endeavor on its own.

There are times when the adjustable band is too large that it may fall off, and sometimes, it is so small that you need to re-adjust it.  Moreover, re-adjusting comes as a tough task, if you are not sure of how to do it.

So, regardless of how your Apple Watch Bands come to you, here is a quick guide on changing and adjusting them.

Apple Watch Band Adjustment Guide

You can easily re-size the band according to your wrist size by removing the equal number of chain links from the band.

Here is how you can remove them:

Step 1

Place your Apple Watch Band upside down in the band adjustment tool and align the pin with the pin hole that is located on side of the band. Now, twist the handle towards the band until pin releases from it.

Keep on repeating the same process until you have removed the desired amount of chain links to fit your wrist.

Step 2

Once you are done with the adjusting, insert them in the reverse order into the Apple Watch band.

Step 3

Now, place your Apple Watch back into the tool. Insert the handle’s pin back into the band and turn it in the inward direction so that your watch is completely back in place. But make sure you perform the process gently and don’t stress the band.

Image Source

Apple Watch Band Changing Guide

How To Change The Link Bracelet?

  • Place your Apple Watch Band on a clean surface including soft padded cloth, lint-free or micro-fiber.
  • Now, press the quick release button to separate the band into two pieces.
  • Hold the band release button and then the slide the band across to remove it. If the band does not slide out, press the release button and make sure you hold it down.
  • Slide the band until you hear a click.

Before you change the band, make sure that it corresponds to the size of your Apple Watch case. You can use Apple Watch Series 1 band with Series 2, 3, 4, and vice versa, as long as the sizes are compatible with each other.

How To Remove The Link Bracelet?

Here are the steps that you need to follow, while you remove the link bracelet.

Step 1: Close The Butterfly Closure

If the butterfly closure is open, fold the butterfly closure from one side at a time, until you hear a click.

Step 2: Hold Down The Quick Release Button

The quick release button lies inside the bracelets, and you only need to hold one down.

Step 3: Separate The Links

Hold down the release button while you pull. Separate the band into two pieces before removing the band from your Apple Watch. Now release the button and slide the button across to remove it.

While you are removing the link bracelet, don’t try to force the band or twist it as will damage both the band and clasp.

Note: The 38mm and 40mm bands work for each other, and bands for 42mm and 44mm are compatible with each other.

How To Check The Band Is In Slot?

Whether you are changing your band or re-adjusting it, make sure that you never force the band into a slot. In case, if you don’t hear a click, slide the band to left and then right. You can also place the band in the center and push it into place.

If your Apple Watch’s Band is installed properly, it will not slide freely until you hold down the release button.

Make sure that you do not wear the watch if your band is sliding.

Here is how you can adjust the Limitless Bands. If you are not able to fix the band, you can get it done from a professional as well.

Best Apple Watch Bands That You Can Consider

The Limitless Infinite Loop Bracelet is a modernized design of a classic that was created in Milan in the 19th century. It is a smooth stainless steel mesh that wraps around your wrist and can be adjusted easily to any size.

It is available in 38mm/40mm; 42mm/44mm, and are compatible with Watch Series 1,2,3, and 4.

  • Limitless Elegance Bracelet

With the Limitless Elegance Bracelet, you can simply harmonize your hand and wrist with your Apple Watch. It comes with a D-link bracelet that highlights your style while enhancing the visual representation of your watch.

  • Confidence Bracelet

Whether you are going at work, a dinner date or for a casual meet up, this bracelet is classic, elegant and gives confidence to you. Featuring a clasp lock design, it gives you an excellent fit and is compatible with both the band sizes, 38mm and 42mm.

  • Limitless Fusion Bracelet

This bracelet is available in four assorted colors and features a one of a kind fusion of link and classic bracelet. It is made up of Zinc alloy and is quite lighter in weight than the stainless steel ones. This watch band is compatible with all the series and lets you make a statement with a minimal effort.

The Final Words

As you are adjusting the Apple Watch Band, adjust it in a manner such that the heart rate monitor has a snug fit with your wrist. It should not cut the circulation; neither should it ride around your wrist.